In-the-hoop projects (ITH) — key charms, pouches, plush in the hoop
What is an ITH project?
Section titled “What is an ITH project?”A piece made largely in the embroidery hoop: key charms, small pouches, plush figures. The machine sews not only motifs but also the tack lines that hold the fabric layers and the seam that holds everything together in the end. Between the steps you lay fabric on, trim back or lay in a ribbon. Then you cut the piece out, turn it, stuff it and close the opening by hand.
Technically there is nothing special about it. An ITH file is stitches and pauses in the right places. StitchPencil does both.
Can I open a finished ITH file?
Section titled “Can I open a finished ITH file?”Yes. Import it in the gallery as a machine file: PES, DST, EXP, VP3, JEF, HUS, XXX or TAP. When a pack holds several formats, take one your machine reads.
Every step arrives as its own section in the layer list, in the file’s order. The maker’s instructions still apply, because they name the steps in that order.
In an ITH file every pause is stored as a colour change, even when no other colour is meant. If you sew everything in one thread, go ahead and give the sections one colour: where that removes a colour change the app sets a machine stop, and the machine still halts in the same place.
How do I build an ITH project myself?
Section titled “How do I build an ITH project myself?”Draw each step as its own layer, top to bottom in the order it is sewn. A key charm goes like this:
- Tack down. A running stitch rectangle, almost the size of the hoop. It holds the fabric you laid on the stabiliser. Shapes and a stitch length of about 3.5 mm.
- Placement. A running line showing where the next piece goes. Stop after it.
- Sew on. The same shape once more, now through the piece you laid on. Stop after it, to trim back. The appliqué recipe makes these three steps from a closed satin ring by itself, and from a closed run the same way without a separate sew-on.
- Motif. Satin, fill and running stitch as usual. On a deep pile, water-soluble topping helps; pull it away before the next step.
- Ribbon. A short line as a mark, a stop, lay the ribbon in, a short line to sew it down.
- Back. Fabric right side down, with a stop before it.
- Final seam. A running stitch around the whole shape, open where you will turn it later. Draw the line open, or part a closed one with the knife. Under Basting the stitch length goes up to 12 mm; 2 to 3 mm is usual for a seam.
Parts you need twice, such as ears, get their own design. Mirroring is in the selection.
How do I set the stops?
Section titled “How do I set the stops?”Swipe a layer row left and tap Stop after. The stop stands as its own row in the list and can be moved. A stop also keeps “Minimize color changes” from moving anything across it, so your steps stay in their order.
Every format writes a stop as a colour change, which on one needle is the same pause. The machine halts and seems to ask for a new thread: do what the step needs and carry on in the same thread.
How do I say what happens at a stop?
Section titled “How do I say what happens at a stop?”Tap the stop row and write it in: “Lay the fur on”, “Lay the ribbon in, loop to the centre”. The sentence then shows in the player when it halts there, and on the worksheet. Whoever gets the file from you does not see it, because machine files carry no text. So pass the worksheet on with it. Emptied, the note is gone; removing the stop removes its note with it; moved, the stop takes its note along.
A file with several colours opens without stop rows, because each colour change already halts the machine. To write a note at one of those pauses, add a Stop after there.
Why does the Design Check say so much about my ITH project?
Section titled “Why does the Design Check say so much about my ITH project?”“Many color changes” and “Many thread cuts” are true of an ITH piece and meant that way: every step is a pause. Swipe the finding left and tap Hide. Keep reading the other findings.
Will it fit my hoop?
Section titled “Will it fit my hoop?”The tack rectangle may nearly fill the hoop; a 100 × 100 mm hoop carries 99.6 mm. You set the hoop size when you create the design. If the hoop is smaller than the piece, the Design Check says so and the export is blocked.