Hoopings — one design, several hoopings
What are hoopings?
Section titled “What are hoopings?”A design larger than your hoop is sewn in several hoopings: the machine sews one part, you rehoop the fabric, it sews the next. The same works with a small hoop on purpose. One hoop is used for all hoopings; it is laid on the design several times.
How do I split a design?
Section titled “How do I split a design?”Tap Design in the editor’s top bar (the gear — the settings of this design, saved in its file) and tap Split across hoopings…. The Hoopings screen opens with a suggestion already laid out: the hoop set in Design settings, placed as often as needed. A size that is not on your hoop list — such as the frame an import puts around a design no hoop holds — is replaced by the largest hoop on your list that takes the largest object — or, if none does, the largest hoop on the list, and the top line says which object is too large. Want a smaller hoop? Choose it in Design settings first, or at the bottom left of the Hoopings screen. Once the design is split, the hoop in Design settings is the hoop of the hoopings: change it there and the hoops are laid out again.
Back on the canvas, the hoops as laid are drawn dashed in their colour, with the number from the Hoopings screen. The grey area behind them is not the hoop but the area around all hoopings: it grows with the design and becomes the hoop again only when you leave the hoopings.
- Hoop size: the button bottom left shows the hoop. Pick another one from your list and the hoops are laid out again.
- Move a hoop: drag it. Near another hoop it snaps to an overlap of 20 mm — room for the alignment crosses.
- Rotate or remove a hoop: tap its number, its rim or inside it, then Rotate 90° or Remove hoop.
- Add a hoop: Add hoop places one beside the selected hoop, on the side where parts still lie in no hoop. A design holds up to 50 hoops.
- Split line: tap Split line and draw a line of at least 15 mm through the design, for example between two words. The hoops are laid out again on both sides of the line, and a letter is never moved across it. A line through an object is named at the top. A word the line divides is divided on purpose and not named. A design holds up to 20 split lines. Removing a line: tap the line, then Remove line; all at once from the … menu › Remove split lines.
- Zoom: pinch, or use the magnifiers at the bottom right. Zoomed in, two fingers move the view (one finger does too, on free canvas); the third button shows everything again.
Objects in a hoop take that hoop’s color. Gray objects lie in no hoop: move a hoop over them or add one. An object is never divided between hoops, so one that is larger than the hoop needs a larger hoop, or is cut into parts with the Knife first; the top line says so, with what to do. The top line shows two notes at first — … and 1 more shows the rest; a hoop that sews nothing is named there too. Each file is centred in its hoop on what it sews, so a hoop can sit a little off where you laid it: a thin dotted outline in its color shows where it really sits. Every change is one undo step; ⌘Z and ⇧⌘Z work with a keyboard.
Which hoop sews an object?
Section titled “Which hoop sews an object?”A hoop that takes the object whole. The hoop already being sewn keeps it — no rehooping for an object it holds; otherwise the next hoop in your numbering. With a split line, an object stays with the hoops on its side of the line. The sewing order is never changed on its own. An object that two hoops take (in their overlap): tap it, and it moves to the other hoop.
What does “Hoop 1 is used more than once” mean?
Section titled “What does “Hoop 1 is used more than once” mean?”The sewing order goes back to a hoop that was already sewn, which means rehooping again. This happens with designs sorted by color: the threads jump between the parts. Order by hooping sorts the sewing order so that each hoop is sewn in one go. Groups stay together; undo brings the old order back.
What are the alignment crosses?
Section titled “What are the alignment crosses?”Two small crosses, A and B, in the overlap of two hoopings, placed on free fabric. Hooping 1 sews them onto the fabric at the end; hooping 2 sews the same crosses first onto the stabilizer, hooped alone. Pin the fabric cross to the stabilizer cross and the fabric lies exactly where it belongs. Cross B has a small flag whose position changes from one rehooping to the next (it repeats after four), so swapped crosses, turned fabric or the wrong file do not match. Crosses stay on the fabric until the end, so the crosses of a later rehooping keep clear of earlier ones — also when the sewing order comes back to a hoop.
Crosses need an overlap of about 15 mm. Without it there are no crosses; the screen says so, and that hooping is placed with its template. Crosses can be switched off in the … menu (Sew alignment crosses).
Two crosses are enough: they fix where the fabric lies and how it is turned. They are placed as far apart as the overlap allows, because a pin half a millimetre off turns the fabric less the farther apart they are. Closer than 30 mm, the screen says so: more overlap makes aligning more accurate.
What do I get when I export?
Section titled “What do I get when I export?”One machine file per hooping: Name-1.dst, Name-2.dst … up to nine, from ten hoopings on Name-01.dst to Name-50.dst (umlauts and special characters are written plainly, as machines show them). The rehoop guide, the worksheet and the stick sheet name every file whole, with its extension. Each file lies in the middle of its hoop, centered on its own stitches — the way Brother machines place every PES anyway — so every machine sews what the template shows; the crosses move with the stitches. Every file is checked against the hoop like any export; a hooping whose own stitches need more room than the hoop is named with its number. Transfer the files to your embroidery machine the way you usually do, and choose them there in order. The worksheet gets an overview page and a template in actual size per hooping.
How do I use the template?
Section titled “How do I use the template?”Print it at 100 %, not “fit to page”: the 50 mm line at the bottom must measure 50 mm. The page shows the sewing field (always — Hoop outline is for the picture on page 1), the center lines with centimeter marks, the top of the hoop and the crosses. Lay it on the fabric and mark the center and the axes for hooping 1. A sewing field larger than the paper is spread over two or more sheets at 100 %, never printed smaller: cut along the ✂ line, lay the sheet over its neighbor so the ⊕ marks meet, and tape — the sheets are named A1, A2 … with a small map in the corner. A worksheet holds up to 200 template pages: past that, only the hoopings placed by their template get sheets (hooping 1, and any without crosses), and the overview says how many pages were left out. If even those are too many, there are none, and the overview says what to do.
How does the rehoop guide work?
Section titled “How does the rehoop guide work?”On the Hoopings screen, tap Rehoop guide: one page per step, large enough to read next to the machine. The screen stays on while it is open, and the guide remembers the page you were on.
- Hooping 1: mark center and axes with the template, hoop fabric and stabilizer so that the hoop’s center marks meet your lines, choose
Name-1.dst, sew. Near the end the machine stops once more: start it again — it sews the crosses for hooping 2 onto the fabric. Only then take the fabric out. - Next hooping: hoop the stabilizer alone, choose
Name-2.dstand start. The machine sews the crosses onto the stabilizer and stops. Pin each fabric cross onto its stabilizer cross, smooth the fabric down and pin it outside the sewing field (temporary spray adhesive can hold it too, if you like), continue. - If the crosses do not match, it is the wrong file or the fabric is turned: stop — only the stabilizer is sewn.
Do not move or turn the design on the machine’s screen: the crosses only meet when every file is sewn where it was planned.
How do I go back to one hoop?
Section titled “How do I go back to one hoop?”… menu → Sew in one hoop again.